ROLEC North America
Toll Free: (888) 658-5774
Kommandogehaeuse-multiVISION-Display-Rolec_TitleImageWide
You are here: | | |

multiVISION Display

  • Photo Gallery
Handle system RAL 9005, deep black
multiVISION display, single-part profile D2
Combo D4 lock and hinge (side W)
D2 back panel with lock and hinge

IP 65

multiVISION Display is a versatile display enclosure made from aluminum profiles. The enclosures are available in nine depths using a combination of three different case profiles. Each enclosure is made to order to the exact customer width and height requirements and machined with holes and cutouts to suit. The front panel can be used to mount various assemblies including membrane keypads, displays and touch panels. Hinges and a lock can be fitted to the rear for quick access inside. An optional handle system enables easy positioning when the unit is fitted to a suspension arm.

multiVISION Display is compatible with all ROLEC suspension arm systems.

Enclosure sizes Made to customer required sizes
L x W x H max. 31,49" x 31,49" x 14,17"
Additional info Versatile display and operating enclosure
Articulated front and rear wall door
Dimensions as per customer requirements
Assembly of front plates without visible screws
Enclosure Extruded aluminum
Door: Aluminum corner pieces mounted with aluminum profiles
Standard front plates: Aluminum 3 mm, Al Mg 1, silver anodized
Optional: Finished front plates, bored, stamped, engraved or printed
Membrane keypads ready for installation
Optional handle frame: Steel pipe, powder coated, RAL 3020, traffic red or RAL 9005, deep black
Enclosure lock: Double bit, triangular, square and special locks also possible
Fastening On a ROLEC suspension arm system or with external mounting brackets
Internal mounting Slide-in contour for spring nuts M4/M5
Ingress protection IP 65 / EN 60529
Gasket Enclosure: Chloroprene profile gasket (CR), temperature resistance: -30°C to +90°C
Front plate: Chloroprene O-ring gasket (CR), temperature resistance: -30°C to +90°C
Surface Powder coating RAL 7040, window gray
Optional: Special colors
Customizing Learn more about our full customizing service for installation-ready enclosures

Dimensions

 
Type
Part No.
Profile
External mounting brackets
Handle system
Mounting plates
Double-bit fastener
Level-fastener
Level-fastener with lock
PDF-Drawing
AutoCAD DXF-Format
AutoCAD DWG Format
3D-Model-Download
Add to my list
MVDK multiVISION-Display MVD-01 60 mm MVD-01 D1 External mounting brackets Handle system Mounting plates Double-bit fastener Level-fastener Level-fastener with lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
MVDK multiVISION-Display MVD-02 120 mm MVD-02 D2 External mounting brackets Handle system Mounting plates Double-bit fastener Level-fastener Level-fastener with lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
MVDK multiVISION-Display MVD-03 60/60 mm MVD-03 D3 External mounting brackets Handle system Mounting plates Double-bit fastener Level-fastener Level-fastener with lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
MVDK multiVISION-Display MVD-04 60/120 mm MVD-04 D4 External mounting brackets Handle system Mounting plates Double-bit fastener Level-fastener Level-fastener with lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
MVDK multiVISION-Display MVD-05 120/120 mm MVD-05 D5 External mounting brackets Handle system Mounting plates Double-bit fastener Level-fastener Level-fastener with lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
MVDK multiVISION-Display MVD-06 180 mm MVD-06 D6 External mounting brackets Handle system Mounting plates Double-bit fastener Level-fastener Level-fastener with lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
MVDK multiVISION-Display MVD-07 60/180 mm MVD-07 D7 External mounting brackets Handle system Mounting plates Double-bit fastener Level-fastener Level-fastener with lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
MVDK multiVISION-Display MVD-08 120/180 mm MVD-08 D8 External mounting brackets Handle system Mounting plates Double-bit fastener Level-fastener Level-fastener with lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
MVDK multiVISION-Display MVD-09 180/180 mm MVD-09 D9 External mounting brackets Handle system Mounting plates Double-bit fastener Level-fastener Level-fastener with lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
standard standard   available available   not available  not available