ROLEC North America
Toll Free: (888) 658-5774
You are here: | |

profiPANEL Standard

  • Photo Gallery
Slide-in contour for spring nuts M4/M5
Installation-ready processing is one of our particular strengths
profiPANEL application
Four simple steps to a perfectly coordinated, cost effective command enclosure

The economical version of the HMI/control enclosure range with a depth of 90 mm. For everyone in a rush, who requires only a small batch size or who does not need millimetre-precise dimensions: “We have developed the “profiPANEL Standard” for these customers. Four standard sizes from a 90 mm basic profile with individually configurable front plate into which every panel PC and additional buttons or switches can be incorporated. The rear wall (on the longer side of the enclosure) features locks and hinges. profiPANEL Standard is quickly available and inexpensive.

The benefits of “profiPANEL Standard” at a glance:
• Four economical standard sizes to fit panel PCs up to 21''
• Inexpensive alternative due to standardisation
• Shorter delivery times as components are held in stock
• Customised machining of the front plate
• Also ideal for smaller order volumes
• Ingress protection IP 65

Just 4 simple steps to a perfectly coordinated, economical control enclosure:
  1. Select enclosure dimensions based on the planned internal mounting.
  2. Define the machining of the front plate required.
  3. Define the position of the suspension arm fixing.
  4. Select optional handle(s). Side or bottom only available.

Enclosure sizes Four standard sizes
L x W x H 400 x 400 x 90 mm for internal mountings from 10'' to 12''
L x W x H 400 x 520 x 90 mm for internal mountings from 12'' to 15''
L x W x H 520 x 520 x 90 mm for internal mountings from 15'' to 17''
L x W x H 520 x 600 x 90 mm for internal mountings from 17'' to 21''
Further information Minimalist, multi-variable design for modern machines
Front plate is permanently connected to the enclosure, mounted almost edgeless and flush
Enclosure Extruded aluminium
PA corner covers, RAL 7035
Standard front plates: Aluminium 3 mm, Al Mg 1, silver anodised
Finished front plates, bored, stamped, engraved or printed
Optional: Profile handle, PA, RAL 7035 and extruded aluminium
Enclosure lock (standard): Locks and exterior hinges (on the longer side of the enclosure)
Fastening With coupling on the ROLEC suspension arm system profiPLUS 50
Internal mountings Slide-in contours for spring nuts M4/M5
Ingress protection IP 65 / EN 60529
Surface Anodised
ROLEC Service Utilise our full service offer for installation-ready enclosures
Configuration Use our handy enquiry form to configure your individual control enclosure

Dimensions

 
Type
Part No.
Length
Width
Height
Handle system
Hinges
Double-bit fastener
PDF-Drawing
AutoCAD DXF-Format
AutoCAD DWG Format
Add to my list
331.090.AAA 10“-12“ 331.090.AAA 15.75 15.75 3.54 Handle system Hinges Double-bit fastener PDF AutoCAD AutoCAD Add to my list
331.090.BBB 12“-15“ 331.090.BBB 20.47 15.75 3.54 Handle system Hinges Double-bit fastener PDF AutoCAD AutoCAD Add to my list
331.090.CCC 15“-17“ 331.090.CCC 20.47 20.47 3.54 Handle system Hinges Double-bit fastener PDF AutoCAD AutoCAD Add to my list
331.090.DDD 17“-21“ 331.090.DDD 23.62 20.47 3.54 Handle system Hinges Double-bit fastener PDF AutoCAD AutoCAD Add to my list
standard standard   available available   not available  not available