ROLEC North America
Toll Free: (888) 658-5774
Aluminiumgehaeuse-conFORM-Rolec_TitleImageWide
You are here: | | |

conFORM

  • Video
  • Photo Gallery



IP 66, Optional: IP 67

conFORM is a highly versatile and economic range of  RFI/EMI shielded aluminum enclosures with in-built shielding. The design does not require expensive and delicate conductive gaskets – continuous contact is created by means of a patented tooth system which is pre-cast into the lid and base.

The conFORM range is ideal for industrial electronics and controls that require special levels of shielding. The enclosures are water-tight and weather resistant to IP 66. Threaded screw bosses are provided inside for fitting circuit boards, mounting plates, terminal rails etc. Accessories such as mounting plates and cable glands are also available.

We can supply conFORM enclosures fully customized to your requirements.

Enclosure sizes 14 sizes
Dimensions: L x W x H
3,11" x 3,30" x 1,73" to 10,55" x 6,61" x 3,93"
Additional info High shielding from radiation interference (RFI/EMI tested by the University of Hanover)
Inexpensive, as there is no need for expensive conductive gaskets
Large range of accessories
Enclosure Diecast aluminum alloy:
EN AN-44300 DIN EN 1706
(GD Al Si 12/DIN 1725)
1° mold slope for casting ejection > internal circumference dimensions decrease by 1° towards enclosure bottom.
Fastening Separate screw channels outside of the enclosure interior
Console panel integration with installation kit
Internal mounting M4/M6 fastening thread on the enclosure base and attachment options in the lid
Ingress protection IP 66 / EN 60529 
Optional: IP 67 / EN 60529
Gasket TPE molded gasket, silicone-free, temperature resistance: -40°C to +120°C
Optional: Silicone gasket, temperature resistance: -50°C to +140°C
Lid screws Stainless steel 1.4567, captive
Surface Powder coating RAL 7032, pebble gray 
Optional: Special colors
Optional: Corrosion protection
Customizing Learn more about our full customizing service for installation-ready enclosures
Documents/downloads Here you'll find all of the technical information and certificates relating to conFORM

Dimensions

con_form_variante_standard
 
Type
Part No.
Length
Width
Height
Weight (g)
Mounting point D
Mounting point E
External mounting brackets
Silicon-gasket
Lid holders
Installation kit
Shielding
Corrosion proof coating
Mounting plates
Protection Class IP 67
Hinges
Supporting rail for series terminals
PDF-Drawing
AutoCAD DXF-Format
AutoCAD DWG Format
3D-Model-Download
Add to my list
110.081.000 EK 081 110.081.000 3.11 3.31 2.64 320 2.48 2.05 External mounting brackets Silicon-gasket Lid holders Installation kit Shielding Corrosion proof coating Mounting plates Protection Class IP 67 Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
110.082.000 EK 082 110.082.000 5.12 3.35 2.64 514 4.45 2.05 External mounting brackets Silicon-gasket Lid holders Installation kit Shielding Corrosion proof coating Mounting plates Protection Class IP 67 Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
110.083.000 EK 083 110.083.000 7.09 3.35 2.64 666 6.42 2.05 External mounting brackets Silicon-gasket Lid holders Installation kit Shielding Corrosion proof coating Mounting plates Protection Class IP 67 Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
110.121.000 EK 121 110.121.000 5.00 4.92 3.54 1050 4.17 3.23 External mounting brackets Silicon-gasket Lid holders Installation kit Shielding Corrosion proof coating Mounting plates Protection Class IP 67 Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
110.123.000 EK 123 110.123.000 8.90 4.96 3.54 1386 8.03 3.23 External mounting brackets Silicon-gasket Lid holders Installation kit Shielding Corrosion proof coating Mounting plates Protection Class IP 67 Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
110.161.000 EK 161 110.161.000 6.54 6.54 3.94 1550 5.51 4.33 External mounting brackets Silicon-gasket Lid holders Installation kit Shielding Corrosion proof coating Mounting plates Protection Class IP 67 Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
110.162.000 EK 162 110.162.000 10.55 6.61 3.94 2128 9.45 4.33 External mounting brackets Silicon-gasket Lid holders Installation kit Shielding Corrosion proof coating Mounting plates Protection Class IP 67 Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
111.081.000 EKF 081 111.081.000 3.11 3.31 1.73 260 2.48 2.05 External mounting brackets Silicon-gasket Lid holders Installation kit Shielding Corrosion proof coating Mounting plates Protection Class IP 67 Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
111.082.000 EKF 082 111.082.000 5.12 3.35 1.73 408 4.45 2.05 External mounting brackets Silicon-gasket Lid holders Installation kit Shielding Corrosion proof coating Mounting plates Protection Class IP 67 Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
111.083.000 EKF 083 111.083.000 7.09 3.35 1.73 538 6.42 2.05 External mounting brackets Silicon-gasket Lid holders Installation kit Shielding Corrosion proof coating Mounting plates Protection Class IP 67 Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
111.121.000 EKF 121 111.121.000 5.00 4.92 2.36 880 4.17 3.23 External mounting brackets Silicon-gasket Lid holders Installation kit Shielding Corrosion proof coating Mounting plates Protection Class IP 67 Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
111.123.000 EKF 123 111.123.000 8.90 4.96 2.36 1150 8.03 3.23 External mounting brackets Silicon-gasket Lid holders Installation kit Shielding Corrosion proof coating Mounting plates Protection Class IP 67 Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
111.161.000 EKF 161 111.161.000 6.54 6.54 2.36 1320 5.51 4.33 External mounting brackets Silicon-gasket Lid holders Installation kit Shielding Corrosion proof coating Mounting plates Protection Class IP 67 Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
111.162.000 EKF 162 111.162.000 10.55 6.61 2.36 1880 9.45 4.33 External mounting brackets Silicon-gasket Lid holders Installation kit Shielding Corrosion proof coating Mounting plates Protection Class IP 67 Hinges Supporting rail for series terminals PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
standard standard   available available   not available  not available