ROLEC North America
Toll Free: (888) 658-5774
ABS-Gehaeuse-starCASE-Rolec_TitleImageWide
You are here: | | |

starCASE

  • Video
  • Photo Gallery



starCASE is a truly multipurpose range of plastic enclosures molded in flame-retardant Luran. These highly attractive and ergonomic housings are perfectly suitable for modern industrial electronics. The enclosures can be mounted on a wall, bulkhead, ceiling or machine – everything is possible.

Unique ROLEC design features include a recessed lid for fitting a membrane keypad, product label or front plate, hinged design covers which hide the lid screws and separate mounting channels, and lid retaining supports for holding the lid in place when the housing is open. The enclosures can be mounted without opening the lid which means your electronics remain protected at all times. Screw bosses are provided inside for fitting circuit boards, mounting plates, terminal rails etc. An optional lock prevents unauthorized access. Matching accessories and cable glands are also available.

We can supply starCASE enclosures fully customized to your requirements.

Enclosure sizes 8 sizes
Dimensions L x W x H
4,72" x 3,54" x 1,96" to 11,02" x 6,69" x 2,36"
Further information Integrated recess for membrane keypads or front plates
Integrated lid support, polypropylene (PP)
Optional: Access safeguard by means of insert locks/sealing set
Full protective insulation in accordance with VDE 0100
Enclosure  ASA+PC, RAL 7035 light gray: 2° mold slope for casting ejection > internal circumference dimensions decrease by 2° towards enclosure base.
Snap-on design covers, captive, ASA LURAN S, RAL 7035 light gray
Special materials and colors on request
Flammability UL 94 V-0 1.5 mm
Fastening  Separate screw channels outside of the enclosure interior. Enclosure fastened while lid closed
Internal mounting  Fastening option for self-grooving screws on the base of the enclosure and in the lid
Ingress protection IP 66 / EN 60529
Gasket  Silicone molded seal, temperature range: -50°C to +140°C
Lid screws  Stainless steel 1.4567, captive
Customizing Learn more about our full customizing service for installation-ready enclosures

Dimensions

star_case_variante_standard
 
Type
Part No.
Length
Width
Height
Weight (g)
Mounting point D
Mounting point E
Shielding
Integrated lid supports
Insert lock
PDF-Drawing
AutoCAD DXF-Format
AutoCAD DWG Format
3D-Model-Download
Add to my list
230.090.000 SC 090 230.090.000 4.72 3.54 1.97 155 3.90 1.34 Shielding Integrated lid supports Insert lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
230.092.000 SC 092 230.092.000 6.30 3.54 1.97 191 5.47 1.34 Shielding Integrated lid supports Insert lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
230.110.000 SC 110 230.110.000 5.51 4.33 2.36 232 4.69 2.13 Shielding Integrated lid supports Insert lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
230.112.000 SC 112 230.112.000 7.87 4.33 2.36 346 7.05 2.13 Shielding Integrated lid supports Insert lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
230.130.000 SC 130 230.130.000 6.30 5.12 2.36 277 5.47 2.91 Shielding Integrated lid supports Insert lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
230.130.000 SC 132 230.132.000 8.66 5.12 2.36 380 7.83 2.91 Shielding Integrated lid supports Insert lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
230.150.000 SC 150 230.150.000 7.09 5.91 2.36 350 6.26 3.70 Shielding Integrated lid supports Insert lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
230.172.000 SC 172 230.172.000 11.02 6.69 2.36 531 10.20 4.49 Shielding Integrated lid supports Insert lock PDF AutoCAD AutoCAD 3D-Model-Download Add to my list
standard standard   available available   not available  not available