ROLEC North America
Toll Free: (888) 658-5774
multiPANEL-ROLEC-Konfigurator
You are here: | | |

multiPANEL with front plate inset from the front



 

multiPANEL Kommando 70 with aluminium front plate
inset from the front, and bolted flush rear wall 

The front plate is inset flush in the enclosure frame. This is fastened to the frame with stays and clamping pieces. The plate can be supplied fully customised with all the necessary modifications. The rear wall is bolted flush. At the end of the configuration you will receive a 3D‐CAD‐drawing on demand and/or a PDF of the configured multiPANEL Kommando.

multiPANEL Kommando 70 with aluminium front plate
inset from the front, and bolted flush door 

The front plate is inset flush in the enclosure frame. This is fastened to the frame with stays and clamping pieces. The plate can be supplied fully customised with all the necessary modifications. The bolted door is equipped with hinges and enables simple opening without completely removing the rear wall. At the end of the configuration you will receive a 3D‐CAD‐drawing on demand and/or a PDF of the configured multiPANEL Kommando.

multiPANEL Kommando 85 with aluminium front plate
inset from the front, and 15 mm deep framed door 

The front plate is inset flush in the enclosure frame. This is fastened to the frame with stays and clamping pieces. The plate can be supplied fully customised with all the necessary modifications. The 15 mm deep framed door is equipped with internal hinges and double‐bit fastener. At the end of the configuration you will receive a 3D‐CAD‐drawing on demand and/or a PDF of the configured multiPANEL Kommando.

multiPANEL Kommando 130 with aluminium front plate
inset from the front, and 60 mm deep framed door 

The front plate is inset flush in the enclosure frame. This is fastened to the frame with stays and clamping pieces. The plate can be supplied fully customised with all the necessary modifications. The 60 mm deep framed door is equipped with internal hinges and double‐bit fastener. At the end of the configuration you will receive a 3D‐CAD‐drawing on demand and/or a PDF of the configured multiPANEL Kommando.