ROLEC North America
Toll Free: (888) 658-5774
You are here: |

mobilCASE accessories

mobilCASE technical data >>

The mobilCASE range of handheld enclosures is ordered from individual parts. Configure your desired enclosures using the components listed below:

Case extrusions

Closed case extrusion - for slide in PCBs

Closed case
extrusion profile

For slide in PCBs

Open case extrusion profile - for PCB assemblies

Open case
extrusion 
profile
For PCB assemblies

Type Width Length Height Closed case extrusion Open case extrusion
P80-1-120 4.65" 4.72" 3.15" 250.080.120 -
P80-2-120 4.65" 4.72" 3.15" - 251.080.120
P80-1-160 4.65" 6.30" 3.15" 250.080.160 -
P80-2-160 4.65" 6.30" 3.15" - 251.080.160
P100-1-160 5.43" 6.30" 3.94" 250.100.160 -
P100-2-160 5.43" 6.30" 3.94" - 251.100.160
P100-1-200 5.43" 7.87" 3.94" 250.100.200 -
P100-2-200 5.43" 7.87" 3.94" - 251.100.200
P130-1-180 6.61" 7.09" 5.12" 250.130.180 -
P130-2-180 6.61" 7.09" 5.12" - 251.130.180
P130-1-240 6.61" 9.45" 5.12" 250.130.180 -
P130-2-240 6.61" 9.45" 5.12" - 251.130.240

Standard case end panel kits

End panel kit DF - Two flat end panels

End panel kit DF
2 flat end panels

End panel kit DF - fitted

End panel kit DF
Shown fitted to case

End panel kit DK - 1 flat end panel, 1 deep end panel with access plug

End panel kit DK
1 flat end panel,
1 deep end panel
with access plug

End panel kit DK - shown fitted to case

End panel kit DK
Shown fitted to case

For extrusion type End panel kit DF End panel kit DK
P80- 580.080.000 581.080.000
P100- 580.100.000 581.100.000
P130- 580.130.000 581.130.000

Special case end panel kits

End panel set ABF with two flat end panels and tilt stand

End panel kit ABF
2 flat end panels,
tilt stand

End panel kit ABK - 1 flat end panel, 1 deep end panel with access plug, and tilt stand

End panel kit ABK
1 flat end panel,
1 deep end panel
with access plug,
tilt stand

End panel kit WH - 2 flat end panels, rotating wall brackets

End panel kit WH
2 flat end panels,
2 rotating wall brackets

For extrusion type End panel kit ABF End panel kit ABK End panel kit WH
P80- 589.080.100 589.080.200 589.080.000
P100- 589.100.100 589.100.200 589.100.000
P130- 589.130.100 589.130.200 589.130.000

Case combining kit PG

End panel kit PG for combining extrusions

End panel kit PG
2 hinged flat end panels

End panel kit PG fitted

End panel kit PG
Shown fitted to P100
and P100 case extrusions

Special end panel kit PG for fitting two case extrusions together. The extrusions are hinges.
Order the kit to suit the combination of extrusions. For example fitting a P80 extrusion to a
P100 extrusion order the P80+P100 kit. Note: standard end panels must be ordered for the
other ends of the extrusions.

For extrusion combination End panel kit PG
P80+P80 588.080.080
P80+P100 588.080.100
P80+P130 588.080.130
P100+P100 588.100.100
P100+P130 588.100.130
P130+P130 588.130.130

Accessories

Set PK - Case protectors with carry strap

Protector Set PK
2 end protectors,
carry strap

Battery holder AH2 - For 2 1.5V AA cells

Battery holder AH2
For 2 x 1.5V AA cells

Battery holder AH4 - For 4 x 1.5V AA cells

Battery holder AH4
For 4 x 1.5V AA cells

Case holder CH

Case holder CH
For storing case

M16 cable gland and adaptor

M16 adaptor
Adaptor ring,
M16 cable gland

For extrusion
type
Protector Set
PK
Battery holder
AH2
Battery holder
AH4
Case holder
CH
M16
adaptor/gland
P80- 583.080.000 584.002.000 584.004.000 584.000.000 585.000.000
P100- 583.100.000 584.002.000 584.004.000 584.000.000 585.000.000
P130- 583.130.000 584.002.000 584.004.000 584.000.000 585.000.000