aluDISPLAY enclosures application

aluDISPLAY - designer extruded aluminum display enclosures

Front plate with no visible fixing screws

Mounting plates fit into slots in the case profile

Simple mounting to the suspension arm

Mounted to our taraPLUS suspension arm system possible

Quick mounting of the front plate

Spring nuts for the fitting PCBs or mounting plates inside

 
 

aluDISPLAY

Designer display enclosures made from aluminum profiles

IP 54

aluDISPLAY is a modern and versatile range of display and command enclosures available in three standard widths. The enclosures are ideal for electronic controls and operating units with flat displays and modules.

The attractive design has many useful features including extruded guide rails inside for fitting slide-in PCBs and modules. Assemblies and components can also be fitted with spring nuts. The front panel is suitable for mounting a membrane keypad, keyboard or touch panel. Assembly or removal of the enclosure is extremely quick thanks to snap-on cover profiles. These enclosures can be connected to our taraPLUS suspension arm system using the compatible end cover.

We can supply aluDISPLAY fully customized to your requirements.

Generate PDF
 
 
 



Kein-Produktbild
  Type Part No. Profile Download 3D-Model-Download Add to my list
ADI 180 Standart ADI 180 RGS.ADI.180 180 mm Download 3D-Model-Download Add to my list
ADI taraPLUS suspension arm ADI 180-T for taraPLUS suspension arm RGS.ADI.180-T 180 mm Download 3D-Model-Download Add to my list
ADI with wall fixation ADI 180-W with wall-/desk fixation RGS.ADI.180-W 180 mm Download 3D-Model-Download Add to my list
ADI 180 Standart ADI 240 RGS.ADI.240 240 mm Download 3D-Model-Download Add to my list
ADI taraPLUS suspension arm ADI 240-T for taraPLUS suspension arm RGS.ADI.240-T 240 mm Download 3D-Model-Download Add to my list
ADI with wall fixation ADI 240-W with wall-/desk fixation RGS.ADI.240-W 240 mm Download 3D-Model-Download Add to my list
ADI 180 Standart ADI 300 RGS.ADI.300 300 mm Download 3D-Model-Download Add to my list
ADI taraPLUS suspension arm ADI 300-T for taraPLUS suspension arm RGS.ADI.300-T 300 mm Download 3D-Model-Download Add to my list
ADI with wall fixation ADI 300-W with wall-/desk fixation RGS.ADI.300-W 300 mm Download 3D-Model-Download Add to my list
  Part No. Add to my list
ADI 180 Standart RGS.ADI.180 Add to my list
ADI taraPLUS suspension arm RGS.ADI.180-T Add to my list
ADI with wall fixation RGS.ADI.180-W Add to my list
ADI 180 Standart RGS.ADI.240 Add to my list
ADI taraPLUS suspension arm RGS.ADI.240-T Add to my list
ADI with wall fixation RGS.ADI.240-W Add to my list
ADI 180 Standart RGS.ADI.300 Add to my list
ADI taraPLUS suspension arm RGS.ADI.300-T Add to my list
ADI with wall fixation RGS.ADI.300-W Add to my list
 
⬤ standard   o available   - not available


 
 
Enclosure sizes

3

Additional info

Versatile display and operating enclosure for flat modules
Simple and quick mounting of internal mountings without dismantling the basic enclosure
Front plates without visible screws
Standard model with 2 closed end covers
Optional: Wall/desk fixation, articulated
Optional: Preparation for attachment to the suspension arm system taraPLUS

Enclosure

Profile: Extruded aluminum profile, AL Mg Si 0.5 / DIN 17615
Lid: Die-cast aluminum alloy, EN AC-44300 DIN EN 1706 (GD Al Si 12/DIN 1725)
Standard front plates: Aluminum 3 mm, Al Mg 1, silver anodized

Fastening

To the ROLEC suspension arm system taraPLUS or with optional wall/desk fixation

Internal mounting

Slide-in contour for spring nuts M4/M5

Ingress protection

IP 54 / EN 60529

Gasket

Lid: TPE molded gasket, silicone-free
Profile: Chloroprene O-ring gasket (CR)

Lid screws

Stainless steel 1.4567

Surface

Profile: Anodized silver
Lid: Powder coating RAL 9005 black
Wall holder: RAL 9005 black.
Coupling pipe: Powder coating RAL 7035, light gray
Optional: Special colors

Customizing

Learn more about our full customizing service for installation-ready enclosures

Assembly instructions

1,353 KB
 

Catalog

2,115 KB
 

Gasket

585 KB
349 KB
 

Material

223 KB
281 KB
153 KB
251 KB
 
 

Your individual quote and sample,
just a few clicks away!

1. Browse the product sections or use the search feature, to find the right product.

2. Review our products and detailed technical information. Add the articles and accessories you need to your list using the “Add to my list” button on the product pages.

3. Return to your list using the top menu “MY LIST” link on any page. You can modify the list and then submit your quotation and/or sample request.

 
© 2022 ROLEC · All rights reserved