multiVISION display MVD-02, single-part profile 120 mm
Type MVD-04 twin section enclosure hinged with side lock
Model MVD-02 with hinged back panel and lock
Suitable for mounting to ROLEC suspension arm systems
Handle system RAL 3020, traffic red
Handle system RAL 9005, deep black
multiVISION Display is a versatile display enclosure made from aluminum profiles. The enclosures are available in nine depths using a combination of three different case profiles. Each enclosure is made to order to the exact customer width and height requirements and machined with holes and cutouts to suit. The front panel can be used to mount various assemblies including membrane keypads, displays and touch panels. Hinges and a lock can be fitted to the rear for quick access inside. An optional handle system enables easy positioning when the unit is fitted to a suspension arm.
multiVISION Display is compatible with all ROLEC suspension arm systems.
|Type||Part No.||Profile||External mounting brackets||Handle system||Mounting plates||Double-bit fastener||Level-fastener||Level-fastener with lock||Download||3D-Model-Download||Add to my list|
|multiVISION-Display MVD-01 60 mm||MVD-01||D1||o||o||o||⬤||o||o||Download|
|multiVISION-Display MVD-02 120 mm||MVD-02||D2||o||o||o||⬤||o||o||Download|
|multiVISION-Display MVD-03 60/60 mm||MVD-03||D3||o||o||o||⬤||o||o||Download|
|multiVISION-Display MVD-04 60/120 mm||MVD-04||D4||o||o||o||⬤||o||o||Download|
|multiVISION-Display MVD-05 120/120 mm||MVD-05||D5||o||o||o||⬤||o||o||Download|
|multiVISION-Display MVD-06 180 mm||MVD-06||D6||o||o||o||⬤||o||o||Download|
|multiVISION-Display MVD-07 60/180 mm||MVD-07||D7||o||o||o||⬤||o||o||Download|
|multiVISION-Display MVD-08 120/180 mm||MVD-08||D8||o||o||o||⬤||o||o||Download|
|multiVISION-Display MVD-09 180/180 mm||MVD-09||D9||o||o||o||⬤||o||o||Download|
|Part No.||Add to my list|
Made to customer required sizes
L x W x H max. 31,49" x 31,49" x 14,17"
Versatile display and operating enclosure
Articulated front and rear wall door
Dimensions as per customer requirements
Assembly of front plates without visible screws
Door: Aluminum corner pieces mounted with aluminum profiles
Standard front plates: Aluminum 3 mm, Al Mg 1, silver anodized
Optional: Finished front plates, bored, stamped, engraved or printed
Membrane keypads ready for installation
Optional handle frame: Steel pipe, powder coated, RAL 3020, traffic red or RAL 9005, deep black
Enclosure lock: Double bit, triangular, square and special locks also possible
On a ROLEC suspension arm system or with external mounting brackets
Slide-in contour for spring nuts M4/M5
IP 65 / EN 60529
Enclosure: Chloroprene profile gasket (CR), temperature resistance: -30°C to +90°C
Front plate: Chloroprene O-ring gasket (CR), temperature resistance: -30°C to +90°C
Powder coating RAL 7040, window gray
Optional: Special colors
Learn more about our full customizing service for installation-ready enclosures
1. Browse the product sections or use the search feature, to find the right product.
2. Review our products and detailed technical information. Add the articles and accessories you need to your list using the “Add to my list” button on the product pages.
3. Return to your list using the top menu “MY LIST” link on any page. You can modify the list and then submit your quotation and/or sample request.