multiVISION enclosures application
multiVISION Kommando MVK-01, single 120 mm side
Type MVK-03 twin section enclosure hinged with side lock
Model MVK-01 with hinged back panel and lock
Suitable for mounting to ROLEC suspension arm systems
Handle system RAL 3020, traffic red
Handle system RAL 9005, deep black
multiVISION Kommando is a range of command enclosures made from aluminum profiles. The enclosures are highly versatile and robust, and being made-to-measure, allow maximum flexibility for housing machine control equipment.
The enclosure assembly consists of aluminum profiles, in three different sizes, that are combined to give different case depths and front and rear formats. Each multiVISION enclosure is made to order to the exact customer width and height requirements and machined with holes and cutouts to suit. The front panel can be used to mount various assemblies including membrane keypads, displays and touch panels. The enclosures can be hinged with a lock for easy access inside. Optional handle bars can also be fitted for positioning when the enclosure is fitted to a suspension arm. A desk version can also be supplied (with separate display and operating enclosure).
multiVISION Kommando is compatible with all ROLEC suspension arm systems.
|Type||Part No.||Profile||Handle system||Mounting plates||Slotted head screw||Triangular screw||Collar-head screw||Level-fastener||Level-fastener with lock||Download||3D-Model-Download||Add to my list|
|multiVISION-Kommando MVK-01 120 mm||MVK-01||K1||o||o||⬤||o||o||o||o||⬤||Download|
|multiVISION-Kommando MVK-02 120/60 mm||MVK-02||K2||o||o||⬤||o||o||o||o||⬤||Download|
|multiVISION-Kommando MVK-03 120/120 mm||MVK-03||K3||o||o||⬤||o||o||o||o||⬤||Download|
|multiVISION-Kommando MVK-04 120/180 mm||MVK-04||K4||o||o||⬤||o||o||o||o||⬤||Download|
|Part No.||Add to my list|
Made to customer required sizes
L x W x H max. 31,49" x 31,49" x 11,81"
Versatile control and command enclosure
Articulated front and rear wall door
Assembly of front plates without visible screws
Door: Aluminum corner pieces with aluminum profiles
Standard front plates: Aluminum 3 mm, Al Mg 1, silver anodized
Optional: Finished front plates, bored, stamped, engraved or printed
Optional handle frame: Steel pipe, powder coated, RAL 3020, traffic red or RAL 9005, deep black
Enclosure lock: Double bit, triangular, square and special locks also possible
To a ROLEC suspension arm system or external mounting brackets
Slide-in contour for spring nuts M4/M5
IP 65 / EN 60529
Enclosure and front plate: Chloroprene O-ring gasket (CR)
Powder coating RAL 7040, window gray
Optional: Special colors
Learn more about our full customizing service for installation-ready enclosures
1. Browse the product sections or use the search feature, to find the right product.
2. Review our products and detailed technical information. Add the articles and accessories you need to your list using the “Add to my list” button on the product pages.
3. Return to your list using the top menu “MY LIST” link on any page. You can modify the list and then submit your quotation and/or sample request.