Slide-in contour for spring nuts M4/M5

Installation-ready processing is one of our particular strengths

profiPANEL application

Four simple steps to a perfectly coordinated, cost effective command enclosure

Profile handles are optionally available

ROLEC Service: Customised front plate

Profile handles are optionally available

 
 

profiPANEL Standard

Design command enclosures in standard sizes

GOST
The economical version of the HMI/control enclosure range with a depth of 90 mm. For everyone in a rush, who requires only a small batch size or who does not need millimetre-precise dimensions: “We have developed the “profiPANEL Standard” for these customers. Four standard sizes from a 90 mm basic profile with individually configurable front plate into which every panel PC and additional buttons or switches can be incorporated. The rear wall (on the longer side of the enclosure) features locks and hinges. profiPANEL Standard is quickly available and inexpensive.

The benefits of “profiPANEL Standard” at a glance:
• Four economical standard sizes to fit panel PCs up to 21''
• Inexpensive alternative due to standardisation
• Shorter delivery times as components are held in stock
• Customised machining of the front plate
• Also ideal for smaller order volumes
• Ingress protection IP 65

Just 4 simple steps to a perfectly coordinated, economical control enclosure:
  1. Select enclosure dimensions based on the planned internal mounting.
  2. Define the machining of the front plate required.
  3. Define the position of the suspension arm fixing.
  4. Select optional handle(s). Side or bottom only available.

Generate PDF
 
 
 



Accessories

profiPANEL-Standard-Zubehoer-ROLEC

Find the right accessories for all profiPANEL standard enclosures.

 

Find the right accessories for all profiPANEL standard enclosures.

  Type Part No. Download Add to my list
655.330.000 profiPANEL Mounting Bracket Set 655.330.000. Download Add to my list
713.003.XXX profiPANEL Corner Covers RAL 3020 713.003.XXX. Download Add to my list
713.005.XXX profiPANEL Corner Covers RAL 5017 713.005.XXX. Download Add to my list
713.009.XXX profiPANEL Corner Covers RAL 9005 713.009.XXX. Download Add to my list
  Part No. Add to my list
655.330.000 655.330.000. Add to my list
713.003.XXX 713.003.XXX. Add to my list
713.005.XXX 713.005.XXX. Add to my list
713.009.XXX 713.009.XXX. Add to my list
 
⬤ standard   o available   - not available


 
 
  Type Part No. Length Width Height Handle system Hinges Double-bit fastener Profile handle Download Add to my list
331.090.AAA 10“-12“ 331.090.AAA 15.75 15.75 3.54 o o Download Add to my list
331.090.BBB 12“-15“ 331.090.BBB 20.47 15.75 3.54 o o Download Add to my list
331.090.CCC 15“-17“ 331.090.CCC 20.47 20.47 3.54 o o Download Add to my list
331.090.DDD 17“-21“ 331.090.DDD 23.62 20.47 3.54 o o Download Add to my list
  Part No. Length Width Height Add to my list
331.090.AAA 331.090.AAA 15.75 15.75 3.54 Add to my list
331.090.BBB 331.090.BBB 20.47 15.75 3.54 Add to my list
331.090.CCC 331.090.CCC 20.47 20.47 3.54 Add to my list
331.090.DDD 331.090.DDD 23.62 20.47 3.54 Add to my list
 
⬤ standard   o available   - not available


 
 
Certifications

GOST

Enclosure sizes

Four standard sizes
L x W x H 400 x 400 x 90 mm for internal mountings from 10'' to 12''
L x W x H 400 x 520 x 90 mm for internal mountings from 12'' to 15''
L x W x H 520 x 520 x 90 mm for internal mountings from 15'' to 17''
L x W x H 520 x 600 x 90 mm for internal mountings from 17'' to 21''

Further information

Minimalist, multi-variable design for modern machines
Front plate is permanently connected to the enclosure, mounted almost edgeless and flush

Enclosure

Extruded aluminium
PA corner covers, RAL 7035, 9005, 3020 or 5017
Standard front plates: Aluminium 3 mm, Al Mg 1, silver anodised
Finished front plates, bored, stamped, engraved or printed
Optional: Profile handle, PA, RAL 7035 and extruded aluminium
Enclosure lock (standard): Locks and exterior hinges (on the longer side of the enclosure)

Fastening

With coupling on the ROLEC suspension arm system profiPLUS 50

Internal mountings

Slide-in contours for spring nuts M4/M5

Ingress protection

IP 65 / EN 60529

Surface

Anodised

ROLEC Service

Utilize our full service offer for installation-ready enclosures

Configuration

Use our handy enquiry form to configure your individual control enclosure

Catalog

11,981 KB
 

Ingress protection

351 KB
 

Material

239 KB
 

Request form / Checklist

1,625 KB
 
 

Your individual quote and sample,
just a few clicks away!

1. Browse the product sections or use the search feature, to find the right product.

2. Review our products and detailed technical information. Add the articles and accessories you need to your list using the “Add to my list” button on the product pages.

3. Return to your list using the top menu “MY LIST” link on any page. You can modify the list and then submit your quotation and/or sample request.

 
© 2019 ROLEC · All rights reserved