aluDISC enclosures application
aluDISC enclosures application
aluDISC round IP 67 diecast aluminium enclosures
aluDISC round IP 67 diecast aluminium enclosures
aluDISC detachable trims hide the lid fixings and mounting screws
aluDISC detachable trims hide the lid fixings and mounting screws
aluDISC can be mounted without opening the lid (protecting the electronics inside)
aluDISC can be mounted without opening the lid (protecting the electronics inside)
aluDISC with recess in lid for a membrane keypad, label or face plate
aluDISC with recess in lid for a membrane keypad, label or face plate
Screw pillars in base and lid for PCBs, mounting plates, rails etc.
Screw pillars in base and lid for PCBs, mounting plates, rails etc.
aluDISC with optional lid retaining straps
aluDISC with optional lid retaining straps
aluDISC enclosures application
aluDISC round IP 67 diecast aluminium enclosures
aluDISC detachable trims hide the lid fixings and mounting screws
aluDISC can be mounted without opening the lid (protecting the electronics inside)
aluDISC with recess in lid for a membrane keypad, label or face plate
Screw pillars in base and lid for PCBs, mounting plates, rails etc.
aluDISC with optional lid retaining straps
aluDISC_video_group_en

aluDISC

The round electronics enclosures

CSA USA registeredUL certified

IP 66, IP 67 - Optional: IP 69K

The key product features:
• Enclosure material: diecast aluminum
• Enclosure surface: powder coating, RAL 7035
• Clip-on design covers
• The enclosure can be fastened when the cover is fitted
• Integrated recess to accommodate membrane keypad or front plate
• Lid screws in stainless steel 1.4567
• Enclosure seal: silicone molded gasket

More


aluDISC is the world's first round diecast aluminum enclosure for industrial electronics. The unique design integrates perfectly with machinery and piping systems. No matter if it is mounted on a wall, to a pipe system or a machine housing, the round aluDISC shape will always make a great impression.

Standard features include IP 66 and IP 67 protection classes, a recessed lid for fitting a membrane keypad or product label, snap-on design covers which hide the lid screws and mounting holes, lid retaining straps, an optional hinged IP 65 transparent cover and screw bosses in the base and lid for fitting PCBs, mounting plates etc. The enclosures can be mounted without opening the lid which means your electronics remain protected at all times. Matching cable glands and other accessories are also available.

We can supply aluDISC enclosures fully customized to your requirements.

Request offer PDF datasheet
Product overview Dimensions Data Sheets Data
Enclosure sizes4
Additional infoIntegrated recess in the lid for membrane keypad or front plates
For AR 120: Optional protective cover with hinge mechanism made from transparent polycarbonate (PC),
UV stabilised, UL 94 V-2 – 0,36 ~ 1,9 mm, HB > 1,9 mm, sealable
Clip-on design covers, plastic POM (polyoxymethylene), similar to RAL 7016 anthracite gray
Optional: Lid support, lid screw with plastic element made from stainless steel 1.4567 and polyamide (PA6)
EnclosureDiecast aluminum alloy
EN AN-44300 DIN EN 1706
(GD Al Si 12/DIN 1725)
1° mold slope for casting ejection > internal circumference dimensions decrease by 1° towards enclosure bottom.
FasteningSeparate screw channels
Internal mountingFastening thread on the enclosure base and in the lid
Ingress protectionIP 66, IP 67 / EN 60529
Optional: IP 69K / ISO 20653
GasketSilicone molded gasket
Optional: Chloroprene O-ring gasket (CR)
Lid screwsStainless steel 1.4567, captive
SurfacePowder coating RAL 7035, light gray
Optional: Special colors
Optional: Corrosion protection
CustomizingLearn more about our full customizing service for installation-ready enclosures

Write us an email
sales@rolec-usa.com

or use our
contact form