Call us
+1 (888) 658-5774
aluDOOR
The new, premium enclosure generation, including door
IP 66, IP 67, IP68 (1.2 m; 2 h), IP 69K The integration of true hinges without additional expenditure has been implemented successfully in the new series. After the »mounting« of the lid and the fixation with the securing screws, they turn into »compact cabinets« with stainless steel screws and stainless steel threaded bushings. Even under extreme operating conditions, this arrangement ensures an absolutely safe and permanent closure technology. aluDOOR enclosures are available either with recesses in the lid for the installation of membrane keypads (ADF) or with a flat lid (ADO). Finally, the installation level of the enclosures is covered by design covers made of aluminium coated silver matt, providing an unparalleled design. All enclosures have domes in bottom sections and lids for the secure fastening of installations.
The key product features:
• Enclosure material: diecast aluminium
• Enclosure surface: powder coating, RAL 7016
• 100° opening angle
• Structurally integrated lid hinges
• Integrated recess in lid for membrane keypad or front plate
• Stainless steel lid screws and threaded inserts
• Enclosure lid without or with recess for fitting a membrane keypad or product label
• Clip-on design covers
• Enclosure seal: PUR
• Honoured with the German Innovation Award 2023
Request offer
PDF datasheet
More
aluDOOR enclosures are a further development of the unique series aluCASE. This enclosure has an unmistakable progressive design. They are the modern, contemporary »packaging« for innovative industrial electronics.
Product overview
Dimensions
Data Sheets
Data
- aluDOOR
- ADF 090
- Part No.
- 133.090.000
- Dimensions
- 3.54x4.72x2.76 Remember
- aluDOOR
- ADF 092
- Part No.
- 133.092.000
- Dimensions
- 3.54x6.30x2.76 Remember
- aluDOOR
- ADF 110
- Part No.
- 133.110.000
- Dimensions
- 4.33x5.51x3.15 Remember
- aluDOOR
- ADF 112
- Part No.
- 133.112.000
- Dimensions
- 4.33x7.87x3.15 Remember
- aluDOOR
- ADF 130
- Part No.
- 133.130.000
- Dimensions
- 5.12x6.30x3.15 Remember
- aluDOOR
- ADF 132
- Part No.
- 133.132.000
- Dimensions
- 5.12x8.66x3.15 Remember
- aluDOOR
- ADF 150
- Part No.
- 133.150.000
- Dimensions
- 5.91x7.09x3.54 Remember
- aluDOOR
- ADF 152
- Part No.
- 133.152.000
- Dimensions
- 5.91x10.24x3.54 Remember
- aluDOOR
- ADF 170
- Part No.
- 133.170.000
- Dimensions
- 6.69x7.87x3.54 Remember
- aluDOOR
- ADF 172
- Part No.
- 133.172.000
- Dimensions
- 6.69x11.02x3.54 Remember
4.72x3.54x2.76
6.30x3.54x2.76
5.51x4.33x3.15
7.87x4.33x3.15
6.30x5.12x3.15
8.66x5.12x3.15
7.09x5.91x3.54
10.24x5.91x3.54
7.87x6.69x3.54
11.02x6.69x3.54
| Enclosure sizes | 10 - with 2 lid variants: ADF = Series with recess in the lid and ADO = Series with flat lid |
| Further information | Integrated hinge function on side D with 2 securing screws (A2, self-forming) |
| Captive lid secured with two screws Fastening with closed enclosure | |
| Clip-on design covers, coated silver matt | |
| Opening angle of the lid max. 100° | |
| Enclosure | Die cast aluminium alloy EN AC-44300 DIN EN 1706 (GD Al Si 12/DIN 1725) 1° mould slope for casting ejection > Internal circumference dimensions decrease by 1° towards enclosure base |
| Fastening | Separate screw channels |
| Internal mountings | Fastening domes with M5 thread on the enclosure bottom and in the lid |
| Ingress protection | IP 66, IP 67, IP 68 (1.2 m; 2 h) / EN 60529, IP 69K / ISO 20563 |
| Gasket | Foamed, polyurethane (PUR) Optional: Silicone seal Optional: EMC gasket |
| Surface | Powder coating, RAL 7016 Design covers, silver matt powder coating Optional: Special colours Optional: Corrosion protection |
| Lid screws | Stainless steel 1.4567, M5 with TX25, captive |
| Lid fastening thread | Casting sleeves, stainless steel A2 |
| Hinge | Securing screws M5 self-forming for hinge attachment |
| ROLEC Service | Utilise our full service offer for installation-ready enclosures |