Call us
+1 (888) 658-5774
conFORM
The EMC standard enclosure
IP 66, Optional: IP 67
The key product features:
• Enclosure material: Diecast aluminium
• Enclosure surface: powder coating, RAL 7032
• High inner collar
• Tooth system in the bottom section for continuous contact
• Sizes compatible with standard enclosures available on the market, therefore easy to exchange
• Lid screws in stainless steel 1.4567
• Enclosure seal: TPE molded gasket
Request offer
PDF datasheet
More
conFORM is a highly versatile and economic range of RFI/EMI shielded aluminum enclosures with in-built shielding. The design does not require expensive and delicate conductive gaskets – continuous contact is created by means of a patented tooth system which is pre-cast into the lid and base.
The conFORM range is ideal for industrial electronics and controls that require special levels of shielding. The enclosures are water-tight and weather resistant to IP 66. Threaded screw bosses are provided inside for fitting circuit boards, mounting plates, terminal rails etc. Accessories such as mounting plates and cable glands are also available.
We can supply conFORM enclosures fully customized to your requirements.
Product overview
Dimensions
Data Sheets
Data
- conFORM
- EK 081
- Part No.
- 110.081.000
- Dimensions
- 3.31x3.11x2.64 Remember
- conFORM
- EK 082
- Part No.
- 110.082.000
- Dimensions
- 3.35x5.12x2.64 Remember
- conFORM
- EK 083
- Part No.
- 110.083.000
- Dimensions
- 3.35x7.09x2.64 Remember
- conFORM
- EK 121
- Part No.
- 110.121.000
- Dimensions
- 4.92x5.00x3.54 Remember
- conFORM
- EK 123
- Part No.
- 110.123.000
- Dimensions
- 4.96x8.90x3.54 Remember
- conFORM
- EK 161
- Part No.
- 110.161.000
- Dimensions
- 6.54x6.54x3.94 Remember
- conFORM
- EK 162
- Part No.
- 110.162.000
- Dimensions
- 6.61x10.55x3.94 Remember
- conFORM
- EKF 081
- Part No.
- 111.081.000
- Dimensions
- 3.31x3.11x1.73 Remember
- conFORM
- EKF 082
- Part No.
- 111.082.000
- Dimensions
- 3.35x5.12x1.73 Remember
- conFORM
- EKF 083
- Part No.
- 111.083.000
- Dimensions
- 3.35x7.09x1.73 Remember
- conFORM
- EKF 121
- Part No.
- 111.121.000
- Dimensions
- 4.92x5.00x2.36 Remember
- conFORM
- EKF 123
- Part No.
- 111.123.000
- Dimensions
- 4.96x8.90x2.36 Remember
- conFORM
- EKF 161
- Part No.
- 111.161.000
- Dimensions
- 6.54x6.54x2.36 Remember
- conFORM
- EKF 162
- Part No.
- 111.162.000
- Dimensions
- 6.61x10.55x2.36 Remember
3.11x3.31x2.64
5.12x3.35x2.64
7.09x3.35x2.64
5.00x4.92x3.54
8.90x4.96x3.54
6.54x6.54x3.94
10.55x6.61x3.94
3.11x3.31x1.73
5.12x3.35x1.73
7.09x3.35x1.73
5.00x4.92x2.36
8.90x4.96x2.36
6.54x6.54x2.36
10.55x6.61x2.36
| Enclosure sizes | 14 |
| Additional info | High shielding from radiation interference (RFI/EMI tested by the University of Hanover) |
| Inexpensive, as there is no need for expensive conductive gaskets | |
| Large range of accessories | |
| Enclosure | Diecast aluminum alloy: |
| EN AN-44300 DIN EN 1706 | |
| (GD Al Si 12/DIN 1725) | |
| 1° mold slope for casting ejection > internal circumference dimensions decrease by 1° towards enclosure bottom. | |
| Fastening | Separate screw channels outside of the enclosure interior |
| Console panel integration with installation kit | |
| Internal mounting | M4/M6 fastening thread on the enclosure base and attachment options in the lid |
| Ingress protection | IP 66 / EN 60529 |
| Optional: IP 67 / EN 60529 | |
| Gasket | TPE molded gasket, silicone-free |
| Optional: Silicone gasket | |
| Lid screws | Stainless steel 1.4567, captive |
| Surface | Powder coating RAL 7032, pebble gray |
| Optional: Special colors | |
| Optional: Corrosion protection | |
| Customizing | Learn more about our full customizing service for installation-ready enclosures |
| Documents/downloads | Here you'll find all of the technical information and certificates relating to conFORM |