mobilCASE

Modern and egonomic extruded aluminum handheld enclosures

IP 54 / IP 65

The key product features:
• Enclosure material: Aluminium profile
• Lid material: Die-cast zinc
• Enclosure surface: Profile silver-metallic, Lid RAL 9005
• Available as 1-part and 2-part profile
• Articulated wall/desk fixation
• Shoulder strap with protective caps
• Accumulator holder for 2 or 4 AA batteries
• Lid screws stainless steel 1.4567
• 1-part profile for the insertion of circuit boards
• 2-part profile for the easy assembly of short-stroke keyboards or displays
• Integrated recess for a membrane keypad or front membrane
• Ingress protection: 1-piece profile IP 65; 2-piece profile IP 54
• Lid gasket: TPE moulded gasket, silicone-free, Gasket, 2-part profile: O-ring gasket (CR)
---

mobilCASE is a modern and ergonomic range of extruded enclosures which is ideal for handheld electronic instruments and mobile machine/robotic controllers. Three standard widths are available to suit a wide range of applications. The enclosures can be supplied in custom lengths on demand. Each enclosure consist of a case profile and two end covers which are supplied with TPE molded sealing gaskets and a screw kit. There are various types of end cover kits and accessories to suit different uses and installation set-ups. The enclosures are specified from individual kits.

HOW TO SPECIFY YOUR mobilCASE ENCLOSURES

1). Enclosure Profile

Select the size and type of enclosure profile you need from the table below (click on part no.). The profiles are specified in PCB widths: 80 mm (3.15"), 100 mm (3.94"), 130 mm (5.12") (Dim. P). Types: 1-Part (IP 65) single profile for slide-in PCBs or 2-Part (IP 54) open profile which allows for keypads, displays etc. to pass through the top (when machined).

2). End Cover Kits

Select a suitable end cover kit from the accessories section. All cover kits include two TPE molded seals and a screw kit. Options:

• Set DF - two flat end covers 
• Set DK - one flat and one deep end cover with M16 screw plug (for battery compartment access)
• Set ABF - adjustable tilt stand with two flat end covers
• Set ABK - adjustable tilt stand with one flat and one deep end cover with M16 screw plug  
• Set WH - wall/machine pivot mount bracket with two flat end covers 
• Set PG - two rotating end covers for connecting two units together.

3). Accessories

Select any optional accessories:

• Set PK - shoulder strap with two protection caps for carrying the unit
• Set CH - case holder for storing the unit on a wall or machine
• Set AH - battery holders for 2 or 4 1.5V AA cells
• Set KV - M16 cable gland adaptor kit (replaces screw plug on deep end covers).

CONFIGURATOR
You can also specify these enclosures in custom sizes using the mobilCASE configurator.

CUSTOMIZED VERSIONS
We can supply mobilCASE enclosures fully machined and finished to your requirements.