mobilCASE enclosures application

Versatile extruded aluminum enclosures for handheld electronics

1-part closed enclosure profile for slide-in PCBs (IP 65)

2-part open enclosure profiles for fitting PCB assemblies with keypads, displays etc. (IP 54)

End Cover Kit DF - 2 flat end covers, 2 TPE seals, fixings

End Cover Kit DK - 1 deep end cover with M16 screw plug, 1 flat end cover, 2 TPE seals, fixings

M16 plug (with deep end cover) gives access to the battery compartment in the profiles

Accessory adapter with M16 cable gland (replaces screw plug)

Optional adjustable tilt stand

Stand kit ABF - 2 flat end covers with tilt stand

Stand kit ABK - flat end cover with tilt stand, deep end cover with M16 plug

Optional wall/desk pivot mount brackets

Pivot mount set WH - with 2 flat end covers

Accessory set PK - shoulder strap with protective caps for carrying the unit

Holder for storing the unit on a machine or wall

Accessory set CH - enclosure holder

Combination kit PG - connects two case profiles

 
 

mobilCASE

Modern and egonomic extruded aluminum handheld enclosures

GOST Certified

IP 54 / IP 65

mobilCASE is a modern and ergonomic range of extruded enclosures which is ideal for handheld electronic instruments and mobile machine/robotic controllers. Three standard widths are available to suit a wide range of applications. The enclosures can be supplied in custom lengths on demand. Each enclosure consist of a case profile and two end covers which are supplied with TPE molded sealing gaskets and a screw kit. There are various types of end cover kits and accessories to suit different uses and installation set-ups. The enclosures are specified from individual kits.

HOW TO SPECIFY YOUR mobilCASE ENCLOSURES

1). Enclosure Profile

Select the size and type of enclosure profile you need from the table below (click on part no.). The profiles are specified in PCB widths: 80 mm (3.15"), 100 mm (3.94"), 130 mm (5.12") (Dim. P). Types: 1-Part (IP 65) single profile for slide-in PCBs or 2-Part (IP 54) open profile which allows for keypads, displays etc. to pass through the top (when machined).

2). End Cover Kits

Select a suitable end cover kit from the accessories section. All cover kits include two TPE molded seals and a screw kit. Options:

  • Set DF - two flat end covers 
  • Set DK - one flat and one deep end cover with M16 screw plug (for battery compartment access)
  • Set ABF - adjustable tilt stand with two flat end covers
  • Set ABK - adjustable tilt stand with one flat and one deep end cover with M16 screw plug  
  • Set WH - wall/machine pivot mount bracket with two flat end covers 
  • Set PG - two rotating end covers for connecting two units together.

3). Accessories

Select any optional accessories:

  • Set PK - shoulder strap with two protection caps for carrying the unit
  • Set CH - case holder for storing the unit on a wall or machine
  • Set AH - battery holders for 2 or 4 1.5V AA cells
  • Set KV - M16 cable gland adaptor kit (replaces screw plug on deep end covers).

CONFIGURATOR
You can also specify these enclosures in custom sizes using the mobilCASE configurator.

CUSTOMIZED VERSIONS
We can supply mobilCASE enclosures fully machined and finished to your requirements.

Generate PDF
 
 
 



mobilCASE Enclosure Profile Dimensions
  Type Part No. Length Width Measurement P Download 3D-Model-Download Add to my list
250.080.120 1-Part Profile P 80-1-120 250.080.120 4.72 4.65 3.15 Download 3D-Model-Download Add to my list
250.080.160 1-Part Profile P 80-1-160 250.080.160 6.30 4.65 3.15 Download 3D-Model-Download Add to my list
250.100.160 1-Part Profile P 100-1-160 250.100.160 6.30 5.43 3.94 Download 3D-Model-Download Add to my list
250.100.200 1-Part Profile P 100-1-200 250.100.200 7.87 5.43 3.94 Download 3D-Model-Download Add to my list
250.130.180 1-Part Profile P 130-1-180 250.130.180 7.09 6.61 5.12 Download 3D-Model-Download Add to my list
250.130.240 1-Part Profile P 130-1-240 250.130.240 9.45 6.61 5.12 Download 3D-Model-Download Add to my list
251.080.120 2-Part Profile P 80-2-120 251.080.120 4.72 4.65 3.15 Download 3D-Model-Download Add to my list
251.080.160 2-Part Profile P 80-2-160 251.080.160 6.30 4.65 3.15 Download 3D-Model-Download Add to my list
251.100.160 2-Part Profile P 100-2-160 251.100.160 6.30 5.43 3.94 Download 3D-Model-Download Add to my list
251.100.200 2-Part Profile P 100-2-200 251.100.200 7.87 5.43 3.94 Download 3D-Model-Download Add to my list
251.130.180 2-Part Profile P 130-2-180 251.130.180 7.09 6.61 5.12 Download 3D-Model-Download Add to my list
251.130.240 2-Part Profile P 130-2-240 251.130.240 9.45 6.61 5.12 Download 3D-Model-Download Add to my list
  Part No. Length Width Add to my list
250.080.120 250.080.120 4.72 4.65 Add to my list
250.080.160 250.080.160 6.30 4.65 Add to my list
250.100.160 250.100.160 6.30 5.43 Add to my list
250.100.200 250.100.200 7.87 5.43 Add to my list
250.130.180 250.130.180 7.09 6.61 Add to my list
250.130.240 250.130.240 9.45 6.61 Add to my list
251.080.120 251.080.120 4.72 4.65 Add to my list
251.080.160 251.080.160 6.30 4.65 Add to my list
251.100.160 251.100.160 6.30 5.43 Add to my list
251.100.200 251.100.200 7.87 5.43 Add to my list
251.130.180 251.130.180 7.09 6.61 Add to my list
251.130.240 251.130.240 9.45 6.61 Add to my list
 
⬤ standard   o available   - not available


 
 
Certifications

GOST

Enclosure profiles

3 standard PCB widths: 80 mm (3.15"), 100 mm (3.94"), 130 mm (5.12") in 2 versions
Closed 1-part profile for slide-in PCBs
2-part profile (top and base) for easy assembly of keyboards, displays etc.

Additional info

Integrated recess in the profiles for a membrane keypad or product label 
Die-cast flat end covers or deep end covers with collar to protect plug connectors
Optional: Adapter with M16 cable gland for external power supply
Optional: Case holder for storing the unit on the wall or machine
Optional: Combination kit for connecting two profiles (also with different sections)
Optional: Shoulder strap with protective caps for portable instruments
Optional: Adjustable tilt stand kits including end covers
Optional: Battery holders for 2 or 4 AA batteries

Material/color

Extruded aluminum profile: AL Mg Si 0.5 / DIN 17615
Powder coating, silver metallic
Optional: Anodized
End cover (2 variants): Die-cast zinc alloy GD-Zn Al 4 Cu 1 / DIN EN 12844
Powder coating, RAL 9005, deep black
Optional: Special colors

Fastening

Optional: Clip holder for setting down devices at the wall or machine
Optional: Articulated wall/desk fixation including stand

Internal mounting

For circuit board widths 80 mm/100 mm (Eurocard)/130 mm

Ingress protection

Profile 1-part IP 65 / EN 60529
Profile 2-part IP 54 / EN 60529
Set PG IP 54 / EN 60529

Gasket

Lid: TPE molded gasket, silicone-free, temperature resistance: -30°C to +100°C
Profile: Chloroprene O-ring gasket (CR), temperature resistance: -30°C to +90°C

Lid screws

Stainless steel 1.4567

Customizing

Learn more about our full customizing service for installation-ready enclosures

Approval

2,087 KB
 

Assembly instructions

739 KB
 

Catalog

965 KB
 

Gasket

116 KB
 

Ingress protection

351 KB
456 KB
 

Material

101 KB
239 KB
281 KB
153 KB
 
 

Your individual quote and sample,
just a few clicks away!

1. Browse the product sections or use the search feature, to find the right product.

2. Review our products and detailed technical information. Add the articles and accessories you need to your list using the “Add to my list” button on the product pages.

3. Return to your list using the top menu “MY LIST” link on any page. You can modify the list and then submit your quotation and/or sample request.

 
© 2020 ROLEC · All rights reserved