K1 back panel with lock and hinge

Handle system RAL 9005, deep black

Combo K3 lock and hinge (side W)

Handle system RAL 3020, traffic red

Optional suspension systems taraPLUS or QUADRO

 
 

multiVISION Kommando

Variable display and command enclosures made from aluminum profiles

GOST

IP 65

multiVISION Kommando is a range of command enclosures made from aluminum profiles. The enclosures are highly versatile and robust, and being made-to-measure, allow maximum flexibility for housing machine control equipment.

The enclosure assembly consists of aluminum profiles, in three different sizes, that are combined to give different case depths and front and rear formats. Each multiVISION enclosure is made to order to the exact customer width and height requirements and machined with holes and cutouts to suit. The front panel can be used to mount various assemblies including membrane keypads, displays and touch panels. The enclosures can be hinged with a lock for easy access inside. Optional handle bars can also be fitted for positioning when the enclosure is fitted to a suspension arm. A desk version can also be supplied (with separate display and operating enclosure).

multiVISION Kommando is compatible with all ROLEC suspension arm systems.

Generate PDF
 
 
 



  Type Part No. Profile Handle system Mounting plates Slotted head screw Triangular screw Collar-head screw Level-fastener Level-fastener with lock Download 3D-Model-Download Add to my list
MVK-01 K multiVISION-Kommando MVK-01 120 mm MVK-01 K1 o o o o o o Download 3D-Model-Download Add to my list
MVK04K multiVISION-Kommando MVK-02 120/60 mm MVK-02 K2 o o o o o o Download 3D-Model-Download Add to my list
MVK04K multiVISION-Kommando MVK-03 120/120 mm MVK-03 K3 o o o o o o Download 3D-Model-Download Add to my list
MVK04K multiVISION-Kommando MVK-04 120/180 mm MVK-04 K4 o o o o o o Download 3D-Model-Download Add to my list
  Part No. Add to my list
MVK-01 K MVK-01 Add to my list
MVK04K MVK-02 Add to my list
MVK04K MVK-03 Add to my list
MVK04K MVK-04 Add to my list
 
⬤ standard   o available   - not available


 
 
Certifications

GOST

Enclosure sizes

Made to customer required sizes
L x W x H max. 31,49" x 31,49" x 11,81"

Additional info

Versatile control and command enclosure
Articulated front and rear wall door
Assembly of front plates without visible screws

Enclosure

Extruded aluminum
Door: Aluminum corner pieces with aluminum profiles 
Standard front plates: Aluminum 3 mm, Al Mg 1, silver anodized
Optional: Finished front plates, bored, stamped, engraved or printed
Optional handle frame: Steel pipe, powder coated, RAL 3020, traffic red or RAL 9005, deep black
Enclosure lock: Double bit, triangular, square and special locks also possible

Fastening

To a ROLEC suspension arm system or external mounting brackets

Internal mounting

Slide-in contour for spring nuts M4/M5

Ingress protection

IP 65 / EN 60529

Gasket

Enclosure and front plate: Chloroprene O-ring gasket (CR), temperature resistance: -30°C to +90°C

Surface

Powder coating RAL 7040, window gray
Optional: Special colors

Customizing

Learn more about our full customizing service for installation-ready enclosures

Approval

2,087 KB
 

Catalog

671 KB
822 KB
 

Enclosures tolerance

107 KB
 

Gasket

52 KB
349 KB
 

Ingress protection

281 KB
 

Material

101 KB
239 KB
281 KB
251 KB
 

Surface

54 KB
 
 

Your individual quote and sample,
just a few clicks away!

1. Browse the product sections or use the search feature, to find the right product.

2. Review our products and detailed technical information. Add the articles and accessories you need to your list using the “Add to my list” button on the product pages.

3. Return to your list using the top menu “MY LIST” link on any page. You can modify the list and then submit your quotation and/or sample request.

 
© 2019 ROLEC · All rights reserved