bl2202-handheld-enclosures-b

 

Diecast vs Extruded Metal Handheld Enclosures

There are three main ways to manufacture a metal enclosure. You can fabricate it from folded sheet metal – but that means lots of welding to ensure the seams don’t leak. And that’s fine for very tough stainless steel enclosures with angular construction. All those right angles are excellent for maximizing space…but not so comfy if those enclosures need to be held in the hand.

So that leaves us with the other two methods – diecast vs extruded. Both offer their own technical benefits:

  • Diecast aluminum handheld enclosures such as handCASE offer the opportunity of superior ergonomics simply because it’s easier to cast complex curves than it is to extrude them. Curves on extruded enclosures will always be very profile-based because of the nature of the process. You’re going to get a two-dimensional X-Y curve multiplied by the length of Z.
  • Extruded aluminum enclosures such as mobilCASE are easier to customize – but only in terms of length. You can’t change the width and height of an individual profile without retooling, but you can specify your extruded housing in a custom length very easily. And because the enclosures are profile-based, they tend to be available in more standard sizes and configurations than their diecast counterparts.

 

 
 
Benefit from our full service offer for installation-ready enclosures.
ROLEC FULL SERVICE
 

Your individual quote and sample,
just a few clicks away!

1. Browse the product sections or use the search feature, to find the right product.

2. Review our products and detailed technical information. Add the articles and accessories you need to your list using the “Add to my list” button on the product pages.

3. Return to your list using the top menu “MY LIST” link on any page. You can modify the list and then submit your quotation and/or sample request.

 
© 2022 ROLEC · All rights reserved