IP66 Enclosures For Industrial Electronics | Rolec USA

IP66 Enclosures

Dust tight, waterproof enclosures for industrial electronics

Dust tight, waterproof enclosures for industrial electronics

ROLEC industrial enclosures tested according to the IEC 60529 IP 66 standard for ingress protection. IP66 electronic enclosures can withstand 30 kPa (4.35 psi) water jets from 3 metres (9 ft, 10 in) in any direction: 12.5 litres (3.3 gallons)/minute for 15 minutes.

Many ROLEC enclosures also offer ‘lid closed’ installation to safeguard the IP66 seal and electronics during fitting and maintenance. Others feature built-in RFI/EMI shielding or are Ex-rated for explosion-risk applications. Choose from aluminum enclosures (tough but light); stainless steel (optional electropolishing for added corrosion resistance); GRP (resistant to chemicals); Luran (UV stable) or ABS.

Also available...

View IP 67 Enclosures - for protection against temporary complete immersion in water
View IP 69K Enclosures - for protection from high pressure washdowns from close range.

View our full range of IP 66 enclosures below:

IP66 Enclosures

aluDISC_GroupInfoImage

aluDISC

An absolute all-rounder in every respect

• The world's first round aluminum enclosures for industrial electronics

• Recessed lids accommodate membrane keypads, front plates or labels

• The enclosures can be mounted without opening the lid

• IP 66, IP 67 / EN 60529, IP 69K / ISO 20653

aluPLUS_GroupInfoImage

aluPLUS

The plus side of our diecast aluminum enclosures

• Designer enclosures with technical finesse in industry-standard sizes

• Recessed lids for fitting membrane keypads, face plates or product labels

• Enclosures can be mounted without opening the lid

• IP 66, IP 67 / EN 60529

aluCLIC_GroupInfoImage

aluCLIC

Aluminum enclosures with quick-change mounting device

• World's first quick-change enclosures

• Extra roomy on the inside for the components

• Fully usable enclosure front area – virtually frameless

• IP 66, IP 67 / EN 60529, IP 69K / ISO 20653

aluSMART_GroupInfoImage

aluSMART

Practical aluminum enclosures with stainless steel mounting device

• Full size recessed area on the front for a membrane keypad or label

• Extremely generous space inside for the electronics

• Secure and discrete screw fastening, from behind

• IP 67 / EN 60529, IP 69K / ISO 20653

aluNORM_GroupInfoImage

aluNORM

Multivariable diecast aluminum enclosures for industrial equipment

• Versatile universal design with space-saving single channel fixings

• Various enclosure combinations available (standard, dual, flat, high)

• Product has proven itself time and time again

• IP 66, IP 67 / EN 60529, NEMA 4

conFORM-conTROL_GroupInfoImage

conFORM

Versatile diecast aluminum enclosures with in-built RFI/EMI shielding

• Inexpensive and robust RFI/EMI housings in a useful range of sizes

• Integrated tooth system between lid and base for bonding

• No delicate and expensive RFI/EMI gaskets required

• IP 66, IP 67 / EN 60529, NEMA 4

conTROL_GroupInfoImage

conTROL

Deeply recessed aluminum 'collar' enclosures for protecting controls

• Inexpensive and robust with in-built RFI/EMI shielding

• Ideal for all types of industrial control equipment

• Special lid with integrated frame protects the control buttons

• IP 66, IP 67 / EN 60529, NEMA 4

aluKOM_GroupInfoImage

aluKOM

Classic, industry standard diecast aluminum enclosures for industrial equipment

• Inexpensive and highly versatile housings

• Wide range of standard sizes

• IP 66 / EN 60529

aluTWIN_GroupInfoImage

aluTWIN

The ultimate heavy duty dual-chamber aluminum enclosures

• Two-chamber design with separate connection spaces

• Space-saving single-channel technology

• Also available with front plate for front control panels

• IP 66 / EN 60529

aluFACE_GroupInfoImage

aluFACE

Versatile control/command enclosures in diecast aluminum

• Fixed or hinged front frames with recessed front panels

• Models with separate terminal compartment

• Models with separate terminal compartment

• IP 65 to IP 67/ EN 60529

handCASE_GroupInfoImage

handCASE

Modern and highly robust handheld enclosures in diecast aluminum

• Ergonomic design that is comfortable to hold

• Recessed lid for fitting a membrane keypad or product label

• With or without battery compartments

• IP 66, IP 67 / EN 60529

mobilCASE_GroupInfoImage

mobilCASE

Modern and egonomic extruded aluminum handheld enclosures

• Available in three widths – custom lengths on demand

• Can also be used as a wall or desk enclosure

• Integrated 1.5V AA battery compartments

• IP 54, IP 65 / EN 60529

polyTOP_GroupInfoImage

polyTOP

Modern highly resistant enclosures in glass-fiber reinforced polyester

• Versatile weather-resistant design in 12 sizes

• Corrosion-resistant polyamide lid screws

• Optional lid fixings for access or tamper protection

• IP 66, IP 67 / EN 60529, NEMA 4

polyDOOR_GroupInfoImage

polyDOOR

Highly resistant GRP polyester enclosures with hinged front lids

• Tough and practical design in 8 standard sizes

• With or without transparent window in the lid

• Optional lid fixings for access or tamper protection

• IP 66 / EN 60529, NEMA 4

technoPLUS_GroupInfoImage

technoPLUS

Advanced plastic enclosures designed for modern outdoor electronics

• Molded in high quality UV-stable ASA material

• Unique pole/mast attachment for fitting outside

• Recessed lids for membrane keypads or product labels

• IP 66, IP 67 / EN 60529, IP 69 K / ISO 20653

starCASE_GroupInfoImage

starCASE

Advanced plastic enclosures molded in flame-retardant ASA+PC

• Very modern and ergonomic design in 8 sizes

• Recessed lid for fitting a membrane keypad or product label

• Hinges design covers hide all fixing screws

• IP 66 / EN 60529

technoCASE_GroupInfoImage

technoCASE

Multivariable enclosures made from ABS with designer cover strips

• Lids and bottoms can be combined with each other as desired

• Recessed lids for membrane keypads, front plates or labels

• Six design cover colors to choose from

• IP 66, IP 67 / EN 60529

technoBOX_GroupInfoImage

technoBOX

Modern and low cost enclosures for electronics and electrical devices

• Elegant and tough design molded in ABS

• Attractive bevelled lid with captured screws

• Recessed lid for fitting a membrane keypad or label

• IP 66 / EN 60529

inoCASE_GroupInfoImage

inoCASE A2

Innovative A2 stainless steel enclosures for high protection

• Useful range of standard sizes

• Patented single-channel technology – gives more space inside

• Mounting holes outside of the sealed area

• IP 66, IP67 / EN 60529, IP 69K / ISO 20653

inoCASEmini

inoCASE A2 mini

Innovative mini A2 stainless steel enclosures for high protection

• Useful range of small sizes

• Patented single-channel technology – gives more space inside

• Mounting holes outside of the sealed area

• IP 66, IP 67 / EN 60529, IP 69K / ISO 20653

inoCASE_GroupInfoImage

inoCASE A4

Innovative A4 stainless steel enclosures for very high protection

• Useful range of standard sizes

• Separate fastening channels outside of the enclosure interior

• Mounting without flanges or holes inside the sealed area

• IP 66, IP 67 / EN 60529, IP 69K / ISO 20653

inoCASEmini

inoCASE A4 mini

Innovative mini A4 stainless steel enclosures for very high protection

• A4 stainless steel enclosures in small sizes

• Separate fastening channels outside the enclosure interior.

• Mounting without flanges or holes inside the sealed area

• IP 66, IP 67 / EN 60529, IP 69K / ISO 20653

commandCASE_GroupInfoImage

commandCASE

Modern cost-effective command enclosures that inspire different thinking

• Ergonomic design with elegant front panel handles

• Lids are screw fixed or hinged with quick-lock or key lock

• Perfectly matches our profiPLUS suspension arm system

• IP 66 / EN 60529

Your individual quote and sample,
just a few clicks away!

1. Browse the product sections or use the search feature, to find the right product.

2. Review our products and detailed technical information. Add the articles and accessories you need to your list using the “Add to my list” button on the product pages.

3. Return to your list using the top menu “MY LIST” link on any page. You can modify the list and then submit your quotation and/or sample request.

© 2019 ROLEC · All rights reserved