Call us
+1 (888) 658-5774
profiPANEL Standard
The design HMI enclosure in standard sizes
The key product features:
• Enclosure material: aluminum profiles corner covers, RAL 7035
• Enclosure surface: anodized silver
• Available in 4 Standard Sizes
• Installation depths: 90 mm
• Select enclosure dimensions based on the planned internal mountings
• Define the machining of the front plate required
• Define the position of the suspension arm fixing
• On request, select pro handle(s). Possible on the side or at the bottom of the enclosure
• Enclosure seal: PUR
More
The economical version of the HMI/control enclosure range with a depth of 90 mm. For everyone in a rush, who requires only a small batch size or who does not need millimetre-precise dimensions: “We have developed the “profiPANEL Standard” for these customers. Four standard sizes from a 90 mm basic profile with individually configurable front plate into which every panel PC and additional buttons or switches can be incorporated. The rear wall (on the longer side of the enclosure) features locks and hinges. profiPANEL Standard is quickly available and inexpensive.
To configure this product, please contact us without obligation. We are happy to help.
The benefits of “profiPANEL Standard” at a glance:
• Four economical standard sizes to fit panel PCs up to 21''
• Inexpensive alternative due to standardisation
• Shorter delivery times as components are held in stock
• Customised machining of the front plate
• Also ideal for smaller order volumes
• Ingress protection IP 65
Just 4 simple steps to a perfectly coordinated, economical control enclosure:
- Select enclosure dimensions based on the planned internal mounting.
- Define the machining of the front plate required.
- Define the position of the suspension arm fixing.
- Select optional handle(s). Side or bottom only available.
Product overview
Dimensions
Data Sheets
Data
- profiPANEL Standard
- 10“-12“
- Part No.
- 331.090.001
- Dimensions
- 15.75x15.75x3.54 Remember
- profiPANEL Standard
- 12“-15“
- Part No.
- 331.090.002
- Dimensions
- 15.75x20.47x3.54 Remember
- profiPANEL Standard
- 15“-17“
- Part No.
- 331.090.003
- Dimensions
- 20.47x20.47x3.54 Remember
- profiPANEL Standard
- 17“-21“
- Part No.
- 331.090.004
- Dimensions
- 20.47x23.62x3.54 Remember
15.75x15.75x3.54
20.47x15.75x3.54
20.47x20.47x3.54
23.62x20.47x3.54
| Enclosure sizes | Four standard sizes |
| L x W x H 400 x 400 x 90 mm for internal mountings from 10'' to 12'' L x W x H 400 x 520 x 90 mm for internal mountings from 12'' to 15'' L x W x H 520 x 520 x 90 mm for internal mountings from 15'' to 17'' L x W x H 520 x 600 x 90 mm for internal mountings from 17'' to 21'' | |
| Further information | Minimalist, multi-variable design for modern machines Front plate is permanently connected to the enclosure, mounted almost edgeless and flush |
| Enclosure | Extruded aluminium |
| PA corner covers, RAL 7035, 9005, 3020 or 5017 | |
| Standard front plates: Aluminium 3 mm, Al Mg 1, silver anodised | |
| Finished front plates, bored, stamped, engraved or printed | |
| Optional: Profile handle, PA, RAL 7035 and extruded aluminium | |
| Enclosure lock (standard): Locks and exterior hinges (on the longer side of the enclosure) | |
| Fastening | With coupling on the ROLEC suspension arm system profiPLUS 50 |
| Internal mountings | Slide-in contours for spring nuts M4/M5 |
| Ingress protection | IP 65 / EN 60529 |
| Surface | Anodised |
| ROLEC Service | Utilize our full service offer for installation-ready enclosures |